HomeUncategorizedFree Lone Worker Policy Template (+ Risk Assessment Checklist)

Free Lone Worker Policy Template (+ Risk Assessment Checklist)

This free lone worker policy template gives you a ready-made plan for people who work alone. Copy the text below, fill in the blue brackets, and have your safety lead check it against your local rules. A risk assessment checklist follows the policy.

This is a general template, not legal advice. Gameo makes Gameo Pro, a lone worker app, so keep that in mind.

Lone worker policy template

1. Purpose

[Company name] wants every worker to get home safe. This policy sets the steps we take to protect people who work alone.

2. Who this applies to

This policy applies to all [employees, contractors and volunteers] who work alone or may be alone at [sites, vehicles or home visits].

3. What “working alone” means

A person works alone when no one else is near who could quickly help if there is an emergency, or if the worker is hurt or becomes ill. [Add examples from your work]

4. Who does what

  • Management makes sure the hazard assessment is done, the equipment works and people are trained.
  • Supervisors plan lone work, make sure each worker has a way to call for help, and follow up on every missed check-in.
  • The designated contact ([name and backup]) checks on workers, records each check and starts the emergency steps if needed.
  • Workers follow the procedure, check in on time, report hazards and use the safety tools they were given.

5. Hazard assessment

Before a task is done alone, we find the hazards and decide how to remove or reduce them. If a hazard cannot be controlled, the task is done by two people. We record each assessment and review it [every 12 months and after any incident].

6. How workers call for help

Every lone worker has [a phone, radio, app or device] that works at the work site. Workers test it at the start of [each shift]. If it does not work, the worker does not start lone work.

7. Check-ins

  • Workers check in [at the start of the shift, every X minutes or hours, and at the end of the shift].
  • Check-ins are by [call, text or app].
  • Higher-risk work gets shorter times between check-ins.
  • The designated contact writes down the time and result of each check-in.

8. If a check-in is missed

  1. The designated contact tries to reach the worker by [phone, text, app].
  2. If there is no answer after [X minutes], the contact calls [the backup contact, a coworker near the site, or site security].
  3. If the worker still cannot be reached, the contact calls [emergency services: 911 in the US and Canada] and gives the worker’s last known location.
  4. The contact informs [the manager] and keeps a written record of each step.

9. Training

Workers and designated contacts are trained on this policy before lone work starts and [every X months]. We keep a record of who was trained and when.

10. Records

We keep hazard assessments, check-in logs and incident reports for [X years, or the period your law requires].

11. Review

We review this policy at least once a year, and after any incident or change in the work. Policy owner: [name and role]. Last reviewed: [date].

Lone worker risk assessment checklist

Fill this in for each task or role that involves working alone.

Topic Question to answer Your answer Action and owner
Work alone Which tasks, places and shifts have a worker alone?
Hazards What could go wrong? Falls, violence or threats, medical events, vehicle trouble, equipment, weather, confined spaces.
Time to help How long would help take to arrive? Is the worker out of phone coverage?
Rules for the task Is there a specific rule for this task or industry, such as a buddy or standby rule?
Communication What can the worker use to call for help: phone, radio, app, device? Does it work at the site?
Check-ins How often? Who checks? What if the worker cannot answer?
Training Have the worker and the person who checks been trained on the procedure?
Controls Can the hazard be removed, or the work done in pairs?

What the rules say in the US and Canada

United States. We found no single OSHA standard for lone workers. The General Duty Clause (OSH Act, Section 5(a)(1)) still applies, and some standards add buddy, standby or check-in rules for certain jobs. Read our guide: Does OSHA Have a Lone Worker Standard? What US Employers Must Do.

Canada. Each province and territory sets its own rules. British Columbia, Newfoundland and Labrador and Prince Edward Island ask for a written check-in procedure. British Columbia and Newfoundland and Labrador require a review at least once a year. Alberta asks for an effective communication system. Saskatchewan has a check-in system rule for late-night retail. Quebec asks for an effective way to monitor a worker in an isolated place. Read our guide: Working Alone Rules in Canada: Every Province Explained (2026).

Where does an app fit?

A policy only works if people follow it. A lone worker app can run the check-ins in section 7 and send an alert for the missed check-in in section 8. Gameo Pro lists a safety check-in, man-down and no-motion alerts, SOS, 24/7 emergency response. Gameo says usage, response times and outcomes can be reported. See safety check-ins and 24/7 emergency response.

Book a Gameo Pro demo

Frequently asked questions

What is a lone worker policy?

A lone worker policy is a written plan for people who work alone. It says who counts as a lone worker, what the risks are, how workers call for help, who checks on them and how often, and what happens if a check-in is missed.

Is a lone worker policy required by law?

It depends on where you are. In the US, we found no single OSHA standard for lone workers, but the General Duty Clause still applies. In Canada, British Columbia, Newfoundland and Labrador and Prince Edward Island require written check-in procedures, and other provinces set their own rules. Check your jurisdiction.

What should a lone worker policy include?

At least: scope and definitions, who is responsible for what, the hazard assessment, how workers communicate, the check-in schedule, the steps after a missed check-in, training, records and a review date.

How often should a lone worker policy be reviewed?

British Columbia and Newfoundland and Labrador require a review at least once a year for their check-in procedures. Many employers use the same schedule. Also review it after any incident or change in the work.

Who should be the designated contact?

Pick a person who can answer fast and who knows the steps. Name a backup too, so there is never a gap. The contact needs training on the procedure.

See it in action

Watch how an innovative mobile application, a 24/7 agent-led emergency response and a comprehensive platform work together in a live demo.