No. OSHA has no single standard for lone workers. Employers still have to protect them under the General Duty Clause, and some specific OSHA standards limit working alone, or require a buddy, a standby person or regular check-ins, for certain tasks.
This is general information, not legal advice. Each row links to its source. Last checked November 17, 2026. Gameo makes Gameo Pro, a lone worker app, so keep that in mind.
What OSHA requires, and what it does not
| Topic | What it says | Who it covers | Source |
|---|---|---|---|
| A general lone worker standard | We found none. OSHA has no single rule for lone workers. | All employers | No standard to cite. Use the General Duty Clause below. |
| General Duty Clause OSH Act, Section 5(a)(1) |
Employers must provide a workplace free from recognized hazards that are causing or likely to cause death or serious physical harm. | Most private employers | OSH Act, Section 5 |
| Electric power work 29 CFR 1910.269(l)(1) |
At least two employees must be present for listed tasks, such as work on lines energized at more than 600 volts. Paragraph (l)(1)(ii) lists exceptions. OSHA has said the working-alone rule does not depend on CPR or first aid response times, and the 4-minute response rule in (b)(1)(ii) is a separate matter. | Electric power generation, transmission and distribution | OSHA: 1910.269(l)(1), OSHA letter, Feb 22, 1999 |
| Permit-required confined spaces 29 CFR 1910.146 |
An attendant is stationed outside the permit space and monitors the authorized entrants. | General industry workers who enter permit spaces | OSHA: 1910.146 paragraph (i), duties of attendants |
| Hazardous waste and emergency response 29 CFR 1910.120(q)(3)(v) and (vi) |
Operations in hazardous areas use a buddy system in groups of two or more. Back-up personnel stand by with equipment, ready to help or rescue. | HAZWOPER emergency response operations | OSHA: 1910.120, OSHA letter, May 1, 1995 |
| Shipyard work 29 CFR 1915.84, Working alone |
When an employee works alone, such as in a confined space or isolated location, the employer must account for the employee at regular intervals through each shift, and at the end of the job or shift. This is done by sight or verbal communication. | Shipyard employment | OSHA: 1915.84 |
| A required check-in app or device | We found no OSHA standard that requires a specific product. Shipyards must account for workers by sight or verbal communication. | All employers | See the rows above. |
Is working alone illegal under OSHA?
Not as a general rule. OSHA has no blanket ban on lone work. Lone work is limited for specific jobs, such as listed tasks on energized power lines. For everything else, the question is whether the employer has dealt with the hazards. A worker who is alone has no one to call for help, so the same hazard can be more serious.
What is the General Duty Clause?
Section 5(a)(1) of the OSH Act says each employer must provide work and a workplace free from recognized hazards that are causing or are likely to cause death or serious physical harm. Section 5(a)(2) says employers must comply with the OSHA standards. The General Duty Clause fills the gap when no specific standard covers the hazard. OSHA’s own text is on its site: OSH Act, Section 5.
State rules can go further
OSHA lists 22 State Plans that cover both private and state and local government workplaces. A State Plan must be at least as effective as federal OSHA, and a state can add its own rules. Two recent examples for lone and isolated workers:
| State | Rule | What it asks for | Dates | Source |
|---|---|---|---|---|
| Washington | Second Substitute House Bill 1524 (Chapter 47, Laws of 2025). L&I rules in WAC chapter 296-137. | Employers in hotels, motels, retail, security guard entities and property services that employ isolated employees must provide a panic button. An isolated employee is a janitor, security guard, hotel or motel housekeeper or room service attendant who works where help cannot respond right away, or who spends at least half of working hours without a coworker or supervisor present. The button is carried by the employee and lets them summon immediate on-scene help from a coworker, a security guard or a representative of the employer. | Effective January 1, 2026. L&I enforces it and began taking complaints on January 1, 2026. | Washington HB 1524-S2 text |
| New York | Retail Worker Safety Act, Labor Law section 27-e | Retail employers with 10 or more retail employees must adopt a workplace violence prevention policy and training. Employers with 500 or more retail employees statewide must provide silent response buttons that alert a security officer, manager or supervisor. | Policy and training: June 2, 2025. Silent response buttons: January 1, 2027. Policy and training apply to employers with 10 or more retail employees. Silent response buttons apply to employers with 500 or more retail employees in the state. | NY Department of Labor: Retail Worker Safety Act FAQ |
Check your own state’s labor department.
Practical steps for employers (our suggestions, not OSHA requirements)
- Find the hazards. List the tasks workers do alone and what could go wrong, such as falls, violence, medical events and vehicle trouble.
- Check for a specific standard. If your work is on the rows above, follow that standard first.
- Give workers a way to call for help. A phone, a radio or an app.
- Check on workers. Set times for check-ins and decide who acts when one is missed.
- Train and review. Show workers how the system works. Review it after any incident.
- Keep records. Write down your assessment, your procedure and your check-in results.
How can a lone worker app help?
An app does not replace the hazard assessment or the written procedure. It can run the check-ins and send an alert when one is missed. Gameo Pro lists a safety check-in, man-down and no-motion alerts, SOS and duress alerts, GPS and indoor location, and 24/7 emergency response. Gameo says usage, response times and outcomes can be reported. See man-down and no-motion detection and safety check-ins. Also read: Working Alone Rules in Canada: Every Province Explained (2026)
Five steps for a US employer with lone workers
- List who works alone, and where and when.
- Look for the hazards of each job. Check whether a specific OSHA standard applies, such as the one for confined spaces.
- Check your state rules. Some states, such as Washington, have their own.
- Write a check-in and emergency plan.
- Train the workers and the people who respond. Then test the plan.
Frequently asked questions
Is there an OSHA lone worker standard?
No. We found no single OSHA standard that covers lone workers. Employers must still protect them under the General Duty Clause, and some specific standards limit working alone or require a buddy, a standby person or regular check-ins for certain tasks.
Is it illegal to work alone under OSHA?
Not in general. OSHA has no blanket ban on working alone. Some standards do not allow lone work for certain jobs, such as listed work on energized power lines. The rule depends on the task and the industry.
Does OSHA require lone worker check-ins?
Not in a general rule. The shipyard standard (29 CFR 1915.84) requires employers to account for a worker who is alone at regular intervals, at the end of the job or shift, by sight or verbal communication. Other industries have no such federal rule that we found, but check-ins are one way to meet the General Duty Clause.
What is the General Duty Clause?
It is Section 5(a)(1) of the Occupational Safety and Health Act. It says employers must provide work and a workplace free from recognized hazards that are causing or likely to cause death or serious physical harm. OSHA uses it for hazards that no specific standard covers.
Does OSHA require panic buttons for lone workers?
Not at the federal level that we found. Some states do. Washington requires panic buttons for isolated employees in hotels, motels, retail, security and property services. New York will require silent response buttons for larger retailers from January 1, 2027.
Do states have their own lone worker rules?
Some do. OSHA lists 22 State Plans that cover both private and public workplaces, and these must be at least as effective as federal OSHA. A state can add its own rules. Check your state.
Related reading: Your Guide to Working Alone OSHA Compliance in 2026 | How panic buttons work